PULSAR II - Matched Pair Small-Diaphragm Condenser Microphones
Top Features
| Two Pulsar II microphones > performance matched for accurate stereo sound |
 |
| Switchable pads and low-cut filters > provides outstanding versatility |
|
| Transformerless FET electronics > designed for low noise and minimal coloration |
|
| Solid brass body with internal shockmounts > delivers premium protection and performance |
|
| Includes stereo bar, risers and hard mounts > allows excellent stereo positioning |
Capture Superior Stereo Recordings
Carefully selected for their nearly identical response, matched pairs of Pulsar II microphones from M-Audio® deliver superior stereo performance. The brass bodies are equipped with internal shockmounts and low-noise transformerless electronics. Each microphone offers a switchable 10 dB attenuation pad, plus an 80 Hz low-cut filter. Together, these functions allow the Pulsar II microphones to adapt to a variety of applications. The included hardware package allows Pulsar II microphones to be mounted in either an X-Y or ORTF (110º) stereo configuration. While ideal for stereo use, these microphones can also be used independently in a wide range of critical recording situations. This complete package includes a stereo mounting bar, hard mounts, risers, windscreens, and cloth bags, as well as a handsome and functional wooden storage/travel case.
Full Features
|
| Two response-matched M-Audio Pulsar II microphones
|
|
| 0.75" diameter, 6-micron sputtered gold diaphragms
|
|
| Cardioid pickup patterns
|
|
| Class A FET transformerless electronics
|
|
| Brass bodies with internal shockmounts
|
|
| Switchable 10 dB pads and 80 Hz filters (18 dB/octave)
|
|
| 48 Volt phantom power required
|
|
| Includes stereo bar, hard mounts, risers, wind screens, and soft bags—all in a wooden travel case
|
Specifications
|
| Type: | Large diaphragm condenser, gold evaporated |
|
| Polar pattern: | Cardioid |
|
| Frequency response: | 20 Hz-20 kHz |
|
| Sensitivity: | 13.8 mV/Pa (-37dBV) |
|
| Max. SPL (<0.5% Threshold Level): | 134dB; 144 dB using -10 dB Pad |
|
| Equivalent noise level: | 15dB—A weighted |
|
| Output impedance: | 300-600 Ω |
|
| Suggested Mic Pre Input Impedance: | 1 - 2.5k Ω |
|
| Preamp topology: | Class A FET, transformerless |
|
| Power requirement: | 30 VDC - 50 VDC phantom power |
|
| Connector: | 3-pin male XLR |
|
| Dimensions: | 22mm (0.87") diameter x 132mm (5.20") length |
|
| Weight: | 115 g (4.0 oz.) |
