Home » Support » Knowledge Base » Knowledge Base

Knowledge Base

Axiom Pro - Changing the MIDI note for a pad
Text size [-] [+]

 

This article explains how to change the MIDI note sent by the Axiom Pro drum pads.
 
 
Programming the Controls on Your Axiom
 
When programming a physical controller on your Axiom Pro, the controller that was last used will be the first one selected for programming.
  1. Press a pad to select for editing.
  2. Select Option 2 for Control
    a. Axiom 49/61 users Press 2 on the Numeric Keypad
    b. Axiom 25 users Press the black key labeled 2 ABC
  3. Press Soft Key 2 to navigate down and select Note
  4. Select the desired MIDI note or enter the desired MIDI note number
     a. Axiom 49/61 users turn Knob E5 or press +/- on the numeric keypad to scroll, or use the numeric keypad to enter a note number
     b. Axiom 25 users turn Knob E5 or press the +/- keys to scroll, or use the numbered keys to enter a note number
  5. Press Soft Key 4 for "Enter"

You can now press the pad to audition the newly assigned MIDI note. If it is not sending the desired note, repeat steps 4 and 5.
 

To Program the other pads:
 
The Axiom Pro drum pads can have up to four profiles allowing you to quickly and easily control up to 32 parameters. Very slowly turn knob E3 to select the different pads (note the control name in the top right of the LCD) and follow the steps above. Turn knob E4 to select the different Profiles.
 
Be sure to press the Soft Key 4 for "Enter" to confirm each setting.  When finished, press Soft Key 1 to Exit.  See this guide to save these settings to the Axiom Pro's memory.