Storing Presets:

The Store function saves control assignment settings to one of 10 memory locations.

IMPORTANT: Storing new assignment settings will overwrite the contents of the selected memory location

1. Press the Advanced button
2. Press the Store key - the LED screen will show the number of the last selected memory location (for example P.0.1.)
3. Enter the number of the memory location you want to store the new settings to by using the number keys or the - / + buttons
4. Press the Enter key to save the changes and overwrite the previous settings of the memory location

 
NOTE: The Oxygen Series factory presets can be restored by holding down the "-" and "+" buttons during power up. IMPORTANT: This will permanently erase all customized user settings.

 
Recalling Presets:

• Oxygen 8v2, Oxygen 25/49/61/88 (blue): The Select button is used to select the function of the 2 data buttons. Each time the Select button is pressed, a different dot will light along the bottom of the LED display to indicate which of the functions the Data buttons are currently assigned to.  Press the Select button until the dot lights above Presets; and then use the Data -/+ Buttons to select the desired preset.
• Oxygen 49/61 (silver): Simply press Preset - (down) or Preset + (up) to toggle through the preset memories. Alternately, you can press both Preset - and Preset + which will put the keyboard into Advanced Function mode, and then enter the memory number on the key bed to load one of the 10 presets from preset memory.