HyperControl for the Axiom Pro keyboards is compatible with Logic Pro 8.0.2 and above*.  Follow the steps below to install the Axiom Pro HyperControl personality for Logic, and to configure the Axiom Pro Keyboard as a control surface in Logic.

* Note: Logic Express does not go through the qualification process

 Installing the HyperControl Personality

1. Download Axiom Pro Logic HyperControl Personality for your operating system from our drivers/updates page at www.m-audio.com/drivers.
2. If a previous version of HyperControl for Logic is installed, double-click to run the uninstaller to remove it.
3. Double-click the Axiom Pro Logic HyperControl Installer Package and follow the on-screen instructions to install the latest version.

HyperControl Configuration for Logic

1. Launch Logic
2. Go to the Logic Pro Menu>Preferences>Control Surfaces>Setup...
3. In the Control Surfaces dialog, click New>Install 
4. Double-click on the Axiom Pro 25 or Axiom Pro model (for 49 & 61 key versions)

Close the setup and add windows and your Axiom Pro keyboard will be in HyperControl mode and ready to control Logic.  Load Memory Patch 14 for "Logic" and the buttons on the Numeric Keypad will be assigned to Logic.  Whenever Logic is launched, HyperControl will activate automatically and map Axiom Pro Controls.  For further information on using HyperControl to control Logic with your Axiom Pro keyboard, please refer to the HyperControl for Logic User Guide available at www.m-audio.com/manuals.