This tutorial will show you how to load/import a bank of User Presets (Device Bank) into Enigma and then load them into your device.  The method used in this guide will overwrite the entire contents of your device's memory.  If this is not desirable, back-up your memory contents before proceeding.


1. Launch Enigma and make sure your controller is recognized (it will show up with a red dot next to it).  On PC, go to the File Menu and select Load (Mac = File>Import Preset Bank).

2. Locate the preset bank/.XML file on your hard drive, then select and open it.

PC:



Mac:



3. Select the new preset bank in the Devices and Files List and click the button to upload the bank to your device.

Note: This will load all presets in the selected bank of presets into your device, and will overwrite the entire contents of your device's memory.  If this is not desirable, back-up your memory contents before proceeding.  If you do not want to load the entire bank of presets, you can copy individual presets to your device as described in this tutorial.

PC:



Mac:



4. SYS will flash on your Device's LCD display, indicating that it is communicating with Enigma.  Windows XP users will receive an additional  confirmation message when complete:



You must Recall the preset for these new settings to be active on your Device.  Axiom Series, Keystation Pro 88, and Ozonic users should enable all groups (A, B, C, D) when recalling the preset to ensure settings for all controllers are loaded.  Please refer to your Device's documentation for how to recall presets and enable groups.